Before we get started, here is a quick summary of current hardware on the market for the Nexus 7000.
- Supervisor 1
- Fabric Modules (FAB1, FAB2)
- M1 Linecards (48 Port 10/100/1000, 48 Port 1G SFP, 32 Port 10G, 8 port 10G)
- F1 Linecards (32 Port 1G/10G, F2 linecards, 48 Port 1G/10G)
- Fabric Extenders (2148, 2224, 2248, 2232)
- Chassis (7009, 7010, 7018)
Instead of writing about all of these design considerations, I thought I’d break it down into a Q & A format, as that’s typically how I end up getting these questions anyway. I’ve ran into all of these questions over the past few weeks (many more than once), so hopefully this will be a good starting point, for myself as I tend to forget, and many others out there, to check compatibility issues between the hardware, software, features, and licenses of the Nexus 7000. The goal is to keep the answers short and to the point.
Q:
What are the throughput capabilities and differences of the two fabric modules (FAB1 & FAB2)?
A:
It is important to note each chassis supports up to five (5) fabric modules. Each FAB1 has a maximum throughput of 46Gbps/slot meaning the total per slot bandwidth available when there are five (5) FAB1s in a single chassis would be 230Gbps. Each FAB2 has a maximum throughput of 110Gbps/slot meaning the total per slot bandwidth available when there are five (5) FAB2s in a single chassis would be 550Gbps. The next question goes into this a bit deeper and how the MAXIMUM theoretical per slot bandwidth comes down based on which particular linecards are being used. In other words, the max bandwidth per slot is really dependent on the fabric connection of the linecard being used.